F540 - Fixed Chamber Baler
Split Drive Gearbox - McHale F540 Non Chopper Round Baler
On the McHale F540 Non Chopper Round Baler, the left hand side of the gearbox drives the rollers in the bale chamber, while the pick up and feed rotor are driven from the right hand side of the machine. This system ensures direct short transfer paths and optimal power distribution.
Pick Up - McHale F540 Non Chopper Round Baler
The McHale F540 non-chopper round baler is equipped with a 2 metre galvanised pick up that lifts even the shortest of crop. Accurate height control can be achieved through a spring balanced hydraulic lifting system. The F540 non chopper baler comes standard with pneumatic guide wheels, which contact the ground on exactly the same line as the tines and guide the pick up perfectly over uneven ground.
The pick up on the F540 non-chopper baler is fitted with lateral feed augers that smoothly guide the crop into the chopping unit. The pick up features
- four rows of tines
- double raced cam bearings
- slip clutch protection
- cam side inspection port for checking/ changing pick up bearings
A crop compression roller is also available as an optional extra on the McHale F540 round baler. This roller evens out lumps in the swarth and minimises the risk of blockages when working in heavy swarths.
Feed Rotor - McHale F540 Non Chopper Round Baler
The star shaped feed rotor fitted behind the pick up on the F540 round baler ensures a high capacity flow of grass into the bale chamber. As crop enters the rotor, rotating tines feed the crop through to the bale chamber. The tines on the rotor ensure high output while the star layout reduces the load peaks as the F540 round baler works in heavy swarths.
Drop Floor - McHale F540 Non Chopper Round Baler
The McHale F540 non chopper round baler is designed to achieve maximum output, however as baling conditions are not always ideal, uneven swarths can occur, which can lead to blockages. The main drive chain is protected by a slip clutch on the PTO.
- Should a blockage occur, the sound of the slip clutch alerts the operator who can hydraulically lower the floor from the tractor cab.
- This widens the feed channel, on re-engaging the PTO the blockage will be fed through.
- The floor can then be reset and baling can resume.
Roller Sealing System - McHale F540 Non Chopper Round Baler
The roller ends are fitted with a McHale-designed reverse thread sealing system. This system protects the bearings; when the roller moves in one direction the thread on the seal moves in the opposite direction. This ensures that any material which tries to get into the back of the rollers is automatically threaded out.
Bale Chamber/ Chamber Bearings - McHale F540 Non Chopper Round Baler
The bale chamber on the McHale F540 round baler produces a 1.23 X 1.25 metre round bale. The bale chamber on the F540 round baler is comprised of 18 heavy duty rollers.
The 18 rollers in the bale chamber of the F540 round baler are made from high-grade tubular steel for maximum strength, while roller design ensures maximum traction. The roller ends are fitted with heavy-duty 50mm shafts on the drive and non-drive side.
The rollers on the McHale F540 round baler are fitted with 50mm bearings on the drive and non-drive side. Drive side rollers, which experience the most load, are fitted with double raced bearings.
Oiling and Greasing - McHale F540- Non Chopper Round Baler
The main drive chains on the F540 round baler can continuously receive oil. The Chamber chains, rotor chain, pick up chains and pick up cam track are oiled continuously from the oil pump, which is driven off the gearbox.
The drive side of the bale chamber can be greased through a series of easily accessible grease banks. The 50mm bearings on the non drive side can also be greased.
Control Console - McHale F540- Non Chopper Round Baler
The F540 non chopper baler is equipped with a cab-mounted wizard control box, which is the operators link to this efficient round baler.
Its features include;
- Automatic and Manual Net Cycles
- Lube Check Alarm
- Drop Floor Activation
- Bale Count
- Knife Activation